How to Build Patio Cover Ideas

Published On May 14, 2018 | By Writer | Outdor Patio

How To Build A Patio Cover A porch is basically just a roof that protects the entry door to a home from rain. It can also be a decorative element to give a house a special character. You can buy a portico, or you can do one for your own design if you have carpentry skills.

How to Build a Patio Cover and Floor

Instructions

How to Build a Patio Cover with set two 4-by-4 or 6-by-6 inch stations at the outer corners of the port area. Attach metal posts brackets to the veranda with concrete nails. Make the posts the same height as the space above the door frames when portico will be attach. Secure inserts with galvanized screws through holes in the brackets are driven by a screw gun.

12 Photos Gallery of: How to Build Patio Cover Ideas

Image of: How to Build a Patio Cover Wood Roof

Image of: How to Build a Patio Cover on Top

Image of: How to Build a Patio Cover in Terrace

Image of: How to Build a Patio Cover Front

Image of: How to Build a Patio Cover for House

Image of: How to Build a Patio Cover for Dinning Set

Image of: How to Build a Patio Cover for Backyard

Image of: How to Build a Patio Cover Best

Image of: How to Build a Patio Cover and Wooden

Image of: How to Build a Patio Cover and Roof

Image of: How to Build a Patio Cover and Gardening

Image of: How to Build a Patio Cover and Floor

Remove the house sideways in the portico area and place a 2-by-6-inch ledger on board width portico. How to Build a Patio Cover can Use a level to make sure the main board is also along the house framing thank you then it’s in place with framing nails and a hammer.┬áSecure inserts with galvanized screws through holes in the brackets are driven by a screw gun. Use a level to make sure the posts are in bulk.

Drill holes with a drill and 3/8 inch piece into the body and house framing. Drive these with a wrench. Place a similar horizontal board over the tops of the posts. Connect two ligatures supports with two-for-6 or two-for-8-inch beams on either side of the portico. Drill holes with a drill and 3/8 inch piece into the body and house framing. Drive these with a wrench. Place a similar horizontal board over the tops of the posts. Connect two ligatures supports with two-for-6 or two-for-8-inch beams on either side of the portico. Spike these into the contest with 16d frame nails and a hammer to make an outer frame for the portico roof.

Leave a Reply